#Iphone lightning dock clock radio install#
#Iphone lightning dock clock radio Bluetooth#

When the alarm rings, press SNOOZE/ DIMMER.

You can press to adjust the interval to repeat alarm. If the timer is deactivated, or the alarm clock icon disappears.If the timer is activated, or is displayed.and pressing the alarm button again will enable or disable the alarm. Pressing once will display the alarms settings – time, volume, source etc. With the time correctly set, Press either ALARM 1 or ALARM 2 to activate or deactivate the timer. Repeat steps 5-6 to set the alarm volume Activate and Deactivate the Alarm Timer:.Repeat steps 5-6 to select whether the alarm will ring for the whole week, on weekdays, or at the weekend.Press ALARM 1 or ALARM 2 to move on to setting the minutes.Press ▲/▼ repeatedly to set the hour then press either Alarm 1 or Alarm 2 depending on which you are setting.Press ▲/▼ on the remote control to select an alarm sound source: FM tuner or buzzer.Press and hold the ALARM (1 or 2) buttons in standby mode on the main unit to select an alarm sound. Ensure that you have set the clock correctly.You can set two alarms which go off at different times. In standby mode, press and hold the CLOCK button for 3 seconds, then press the ►|| button to select 12 / 24 hour format. Repeat steps 2-3 to set the minutes, day, month and year.Press the CLOCK button to confirm, minute indicator will blink.Set the hour with the ▲ button or ▼ button.In standby mode, press and hold the CLOCK button for some seconds, hour indicator will blink.The built-in clock shows the correct time in the display.

The unit will automatically revert to Standby Mode when not in use for 15 minutes.īe sure to unplug the power cord from the outlet when the system is not in use for an extended period of time. Press and hold ON/OFF button on the unit or press the button on the remote control again to turn the system off and go to standby mode. When turning the system on, the unit will start in the same mode as it was in when it was switched off. Press ON/OFF/SOURCE to select different functions. Press ON/OFF button to turn the system on from standby mode. You can use all the functions on the top of the unit or the remote control after connecting to power supply (called Standby Mode) Warranty Card Using the Home Hub General Operation.Never recharge a battery unless it is confirmed to be rechargeable.Doing so could cause batteries to short circuit, leak or explode.

Do not carry or store batteries with other metallic objects.

Do not use any batteries other than those specified.

If the batteries leak, wipe away the leakage inside the battery compartment and replace the batteries with new ones.

When the Remote Control is not going to be used for a long time (more than a month), remove the battery from the Remote Control to prevent it from leaking.

Insert the battery tray back into the slot Precautions Concerning Batteries.

Place a new CR2025 battery into the battery tray with correct.

Pull out the battery tray and remove the old battery.

Connect the AC power cord to the wall socketĬonnect the AC Power cord to the wall socket

Before connecting the AC power cord, ensure you have completed all other connections.

Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.

Close the battery compartment Connect Power.

#Iphone lightning dock clock radio install#

Install two AAA batteries (not supplied) with above.

If the system is unplugged or if a power failure occurs, all setups of the unit will be erased unless there are batteries in the unit.

Batteries (not supplied) are for powering the clock and alarm back memory only.

You can only use AC power as power supply.

– Increase/Decrease the volume level Install Batteries – Press and hold this button to search radio stations automatically SKIP FORWARDS ► ► | – Skip to next audio file.– Press and hold this button in the standby mode to set – Select a preset sound effect: Classic, Rock, Jazz, etc.

#Iphone lightning dock clock radio Bluetooth#

– Press and hold to enable Bluetooth pairing mode in – Press and hold this button to search radio stations – Select between FM and BT Wireless Audio functions